Process Applicability
Product Showcase
PRODUCT CLASSIFICATION
Contact Us
Telephone: +86-29-88341693
Fax: +86-29-88341693
Email: xametalwk@163.com
Website: www.metalwk.com
Add: Room 1005, Block F, Van Metropolis, No.35, Tangyan Road, Hi-tech Zone, Xi'an, P.R.China.
On-line Saw for Cold Rolling Pipe Mill
On-line saw for cold rolling pipe mill is applied for on-line sawing and cutting
Keyword:
sawing
process
rolling
Category:
Auxiliary equipment
On-line Saw for Cold Rolling Pipe Mill
On-line saw for cold rolling pipe mill is applied for on-line sawing and cutting copper pipes produced from the cold rolling mill or for cut-to-length sawing pipes in its continuous production line. The sawing can be divided into two methods, toothed saw and chipless saw. The sawing method can be selected according to the different pipe thickness.
The times of rolling (times/minute) | 80 max. |
Rotation angle（angle/times） | ~55 |
Feed of export(mm/times) | ~100 |
Cut-to-length(m) | 4~10 |
Cutting range of toothed saw | Min.：44×2～5 |
Max.：65×2～5 | |
Cutting range of toothless saw | Min.： 44x1~2.5 |
Max.：65x1~2.5 |
Equipment Features
1.Continuous cut-to-length sawing can be processed in the process of rolling pipes of coild rolling mill.
2.The toothed sawing can be process for thick walled tube, toothless sawing for thin walled， these two methods can be free Switched according to different demands.
3.Less rag of saw bite and 20% of chips decreasing compared with general transsection method.
4.When adopted the toothless sawing, the pipe orifice is smooth without copper chips and the inside of pipe is clean without influencing the sequential processing.
5. Automatic cutting with high cutting efficiency, no need manual operation.
Previous Page
Next Page
Previous Page
Next Page
Online Message
*Note: Please ensure that the information is filled in accurately and keep the communication open. We will contact you as soon as possible.